<form id="5qzxo"><span id="5qzxo"><track id="5qzxo"></track></span></form><wbr id="5qzxo"></wbr>
      
      

          <em id="5qzxo"><source id="5qzxo"><dl id="5qzxo"></dl></source></em>

        1. <em id="5qzxo"></em>

          公司新聞

          首頁 > 公司新聞
          護坡模具是如何使用的
          發布人:管理員   發布時間:2021-5-7
          護坡模具是如何使用的?因為此類模具都是混凝土預制塊塑料模具中的一種,所以制作方式,過程基本都是一樣的,在使用之前需要先將護坡模具內部全面刷油

          How to use slope protection mould? Because this kind of mould is one of the plastic moulds of concrete precast block, the production method and process are basically the same. Before using, the interior of slope protection mould needs to be fully oiled

          然后需要將混凝土原料澆灌進入到模具當中,雖然進行了刷油的操作,但還是難免會出現粘連的情況,所以需要及時進行清理,因為粘連的混凝土會在護坡模具的二次使用以及在保存時出現很多的情況

          Then the concrete raw materials need to be poured into the mold. Although the oil brushing operation is carried out, it is inevitable that there will be adhesion, so it needs to be cleaned in time, because the adhesion concrete will appear in the secondary use of the slope protection mold and in the preservation

          比如,在使用粘連著混凝土的模具在進行制作時就會導致生產的產品的質量受到很大的影響,表面的堅實度有所不足,并且表面不夠平整,這樣美觀性就會很受影響,不符合人們的審美標準,也就不能起到美化路面的作用。

          For example, in the use of adhesive concrete mold in the production will lead to the production of product quality is greatly affected, the surface firmness is insufficient, and the surface is not smooth enough, so the beauty will be affected, not in line with people's aesthetic standards, also can not play the role of beautifying the road.

                                                 

          粘連著混凝土的護坡模具在保存時也會遇到很多的問題,因為是塑料材質,會很怕腐蝕,而混凝土具有一定的腐蝕性,這就會加速護坡模具的老化,使用的過程中會很容易出現損壞的情況

          There are many problems in the preservation of the slope protection mould with concrete. Because it is made of plastic, it will be very afraid of corrosion, and the concrete has certain corrosiveness, which will accelerate the aging of the slope protection mould, and it will be easy to be damaged in the process of use

          并且因為在保存時是疊放保存的,疊放的數量應該是有所限制的,數量過多就會給下面的模具產生很大的壓力,造成變形,制作出的產品的形狀就不會標準,護坡模具使用時容易出現無法安裝的情況,這就給施工方帶來了很多的麻煩。

          And because the storage is stacked, the number of stacked should be limited, too much will give the following mold a lot of pressure, resulting in deformation, the shape of the product will not be standard, slope protection mold can not be installed easily, which brings a lot of trouble to the construction party.

           

          上一篇:沒有了
          久久9热综合国产日韩-久久a级毛片免费看-久久a热午夜无码久久